As buchas de rolamento liso KS PERMAGLIDE ® estão disponíveis como produto padrão com diâmetros internos de até 100 mm ou 300 mm dependendo do material. As buchas de rolamento liso com diâmetro maior são fabricadas a partir de chapas laminadas como produção especial. Os mancais lisos são fabricados em qualquer tamanho intermediário de 80 a 650 mm dependendo de suas necessidades.
Aplicações, por exemplo
Hydraulic energy plants
Hydraulic pumps
Hydraulic cylinders
Wide-body aircraft
Large-scale industrial plants
Crane construction
Drag lifts and rope lifts
Railway construction and mining
Shipbuilding
Large-diameter plain bearing bushes are available in all KS PERMAGLIDE® materials:
For dry running or lubricated applications
Unleaded or leaded
With improved corrosion protection
Material | maximum dimension (Di) standard | maximum dimension (Di) special production |
---|---|---|
P10 | 300 mm | 600 mm |
P11 | 100 mm | 600 mm |
P14 | 300 mm | 600 mm* |
P147 | 300 mm* | 600 mm* |
P20 | 100 mm | 600 mm* |
P200 | 100 mm | 600 mm* |
P22, P23, P202, P203 | 100 mm | 600 mm* |
* On request
Sheets of different KS PERMAGLIDE® materials are processed to create thinwalled large bushes with low space requirements. The sheet sections are shaped into plain bearing bushes on roller bending machines. The nominal wall thickness of the KS PERMAGLIDE® sheets is usually 2.5 mm. The sheets are up to 236 mm wide. The sliding-surface coated sheet material is available as coilware. This means that the length of the sheets and the diameter of the bushes produced are variable.
The circumference of a cylindrical plain bearing with a diameter of over 120 mm is measured with a precision tape measure in accordance with ISO 3547. To comply with the permitted concentricity, the plain bearing is measured in several levels. The second important dimension for determining the bearing dimensions is the wall thickness, which is measured point by point with a gauge micrometer.
Due to the manufacturing process, rolled bushes have a joint. The bushes are also produced with a press-in excess to the locating hole. The press-in excess is measured depending on the diameter and is several 1/10 mm. This means that the bush its closely against the locating hole in the press it and the joint is closed completely. When pressed in this way, the bushes are secured against moving both radially and axially and provide deined sliding surfaces.
Mounting a large bush is a challenge. Suitable press-it tools are not always available, as they are expensive to buy in extremely large dimensions or cause diiculties with handling. An easy method for mounting on-site is shrinking the bush with liquid nitrogen. The plain bearing is covered completely with liquid nitrogen LN2 in a receptacle. With its slim structure, the plain bearing takes on a temperature of –196 °C in just a few seconds. This reduces the volume of the plain bearing. A joint clearance to the locating hole in the millimetre range is created. This enables the plain bearing to be pressed in easily. When the plain bearing is in position, it takes on the ambient heat, expands and returns to its original form, thus forming a stable press it.
Small batches sizes from 1 piece
Diâmetro personalizado diferente das dimensões padrão
Buchas de rolamento liso em grandes diâmetros
Sem custos de ferramentas
Alto grau de flexibilidade, por exemplo, os produtos podem ser fabricados rapidamente
Produção de acordo com os mais altos padrões de qualidade com tolerâncias conforme DIN ISO 3547
Produções especiais estão disponíveis em todos os materiais padrão KS PERMAGLIDE ® (materiais especiais sob consulta)
Pode ser etiquetado mediante solicitação com o número do desenho, número do item, etc.